- Remove the two screws that run from the power supply to the lamp
- Pull out the connector
- There are three Screws to be removed from the fan shroud in this step
- Remove Fan Shroud
- Now lift up and remove the fan
- To remove the side panel of the case- gently pry around the corners until removed
- A look at the side and rear panel of the case removed
- Now we Remove the 5 screws of the Mirror/LCD/Lens assembly
- And from the left side lift up on the Projection assmebly to remove from the unit
- Projection assembly removed
- Next remove the fan Channel by unscrewing one screw as labeled in red circle
- This piece i find rather interesting considering the job of the one fan is to route air particularly to the underside of the three LCD Screens for cooling
Tidak ada komentar:
Posting Komentar